carbs..
Go to page 1, 2  Next  :| |:
-> Other Makes / Other Mechanical Questions / Tech Ideas

#1: carbs.. Author: dupont.07Location: west PostPosted: Thu Jan 28, 2010 9:30 am
    ----
hey.. the bike is too rich.. what to do..?? been using 20ml 2t per 1 liter petrol... when i ride... i need to bring 3 plugs... of which i will use all 3 of them...

#2: Re: carbs.. Author: sopsLocation: Singapore PostPosted: Sun Jan 31, 2010 3:24 am
    ----
bro. Same problem with me. Was about to start a new thread on "how to reduce spark plug fouling". Maybe you can change the title.

The recommended 2t ratio is correct according to the manual. I burn 1-2 spark plugs per ride but that's becoz I was dumb enough to put 300ml of 2t per full tank. HAHA.. well, the other way is to re-jet. Get it to run leaner. I've been doing some reading up to reduce this problem and it's either:

- 2t ratio
- gasket worn (too little or too much oxygen in the chamber)
- air filter not clean
- jetting issues (fuel mixture too rich)

I've also read that as a temp fix, can use a hotter spark plug if it's carbon fouling (sooty or wet black plugs). Otherwise, can keep the RPM high to burn off the carbon deposits. Have to keep clutching in and revving the bike if we go slow or stop the bike. I'm going to slowly zoom in all the other factors before deciding to re-jet my bike.

I've heard that some KTMs also have this problem. Can anyone share? I'm a noob at 2 strokers.

#3: Re: carbs.. Author: dupont.07Location: west PostPosted: Sun Jan 31, 2010 6:14 am
    ----
thats because we both ride the same bike model...!!!

#4: Re: carbs.. Author: FairozLocation: east PostPosted: Sun Jan 31, 2010 6:29 am
    ----
Ride hard Bro....

#5: Re: carbs.. Author: sopsLocation: Singapore PostPosted: Mon Feb 01, 2010 5:29 am
    ----
dupont.07 wrote:
thats because we both ride the same bike model...!!!

Haha! I know! But in the forums overseas, the ang mos never say much about gas gas fouling up so fast. I know some KTMs also eat plugs, but I've also seen a lot of other KTM2s that go on and on without a change of plug. Surely, it's a factor we can try to fix.. Will update you soon. When ride man? Must see each other's ride.. I'm still a klutz with the gg..

#6: Re: carbs.. Author: dopplegangus PostPosted: Mon Feb 01, 2010 6:49 am
    ----
dupont.07 wrote:
hey.. the bike is too rich.. what to do..?? been using 20ml 2t per 1 liter petrol... when i ride... i need to bring 3 plugs... of which i will use all 3 of them...


Most likely, carb is faulty. Change jetting. If still cannot, get a new carb....

#7: Re: carbs.. Author: dupont.07Location: west PostPosted: Mon Feb 01, 2010 7:32 am
    ----
nis, it all started when i serviced my carb.. before that, when bike is really in messed up order, nothing.... i can use the plug for a mnth without changing it... after i serviced the bike, carbs and everything, then the plug eating problem starts.......


if to get new carb, what would be the ideal one...?? pwm...?? how much??

#8: Re: carbs.. Author: dopplegangus PostPosted: Tue Feb 02, 2010 3:46 am
    ----
dupont.07 wrote:
nis, it all started when i serviced my carb.. before that, when bike is really in messed up order, nothing.... i can use the plug for a mnth without changing it... after i serviced the bike, carbs and everything, then the plug eating problem starts.......


if to get new carb, what would be the ideal one...?? pwm...?? how much??


I personally love PWM.... and the spark plug last up to a year. Use iridium sparkplug. It produces a better spark and it will eliminate your sparkplug problem but you're not really solving the problem. The best is to change the carb. I guess $450-$500....

#9: Re: carbs.. Author: ytseLocation: sg PostPosted: Tue Feb 02, 2010 5:47 am
    ----
Sorry guys, anybody intrested on a DR 650 post 96 oem Mikuni BST 40mm carb for 150..Do contact me Eizz 9740 6222.. Smile Read on TT ang moh fix on XR4..Check out the url.. Thanks..

www.thumpertalk.com/fo...p?t=822033

#10: Re: carbs.. Author: dopplegangus PostPosted: Tue Feb 02, 2010 7:05 am
    ----
ytse wrote:
Sorry guys, anybody intrested on a DR 650 post 96 oem Mikuni BST 40mm carb for 150..Do contact me Eizz 9740 6222.. Smile Read on TT ang moh fix on XR4..Check out the url.. Thanks..

www.thumpertalk.com/fo...p?t=822033


Bro, we are talking about 2 strokes here. So your sales doesn't make sense here. You will have better luck at the classified section.

#11: Re: carbs.. Author: ytseLocation: sg PostPosted: Tue Feb 02, 2010 7:50 am
    ----
Sorry my bad bros..:oops: Embarassed Embarassed

#12: Re: carbs.. Author: dupont.07Location: west PostPosted: Wed Feb 03, 2010 6:11 am
    ----
dopple, change to what carb..???

#13: Re: carbs.. Author: dopplegangus PostPosted: Wed Feb 03, 2010 6:46 am
    ----
dupont.07 wrote:
dopple, change to what carb..???


Keihin PWM. Go to Ah Seng....

#14: Re: carbs.. Author: dupont.07Location: west PostPosted: Wed Feb 03, 2010 7:39 am
    ----
what...? go to AH SENG...??? AH SENG OF MAYO STREET.....?????

#15: Re: carbs.. Author: dopplegangus PostPosted: Wed Feb 03, 2010 10:03 am
    ----
dupont.07 wrote:
what...? go to AH SENG...??? AH SENG OF MAYO STREET.....?????

Why? Scared? lol



-> Other Makes / Other Mechanical Questions / Tech Ideas

All times are GMT

Go to page 1, 2  Next  :| |:
Page 1 of 2